Guide to Choosing the Right Truck Coolant
If you want to extend the life of your engine, it is important to use the right coolant. However, the coolant you use for small vehicles may not necessarily be the best for trucks. The coolant requirements for trucks is different from that of small cars due to the heavier load they carry. You should do your research well to find the right truck coolant to buy. Using the right coolant will ensure that the engine does not overheat or get damaged. You can view website here for more great tips!
The Right Coolant for Your Truck
There are many types of antifreeze or coolant that may work for your truck. The most common ones are propylene glycol and ethylene glycol. Ethylene glycol is very toxic and adequate safety measures should be taken if you intend to use it as your truck coolant. The compound should not be allowed to drain into the water table.
The national authorities have rated propylene glycol safer than ethylene glycol and this explains why it is more popular among truckers. This coolant has many uses, including in toiletries, foods and aircraft de-icing. However, both ethylene glycol and propylene glycol should not be allowed to drain into the water table.
The general rule of thumb is that the engine coolant and water should be mixed in a 50/50 ratio. The mixture should not have less than 40 percent of water. Majority of people know that the coolant's work is to keep the engine from freezing. While this is one of the functions, it is not the main one. The mixture helps to increase the boiling point and lower the freezing point. This is the main reason for using a coolant. Failing to use the right coolant an lead to cavitation, corrosion or rust on the cylinder wall. Your engine may die due to these occurrences. Read more great facts, click this homepage.
Why You Should Check the Freezing Point
If you live in an area that is usually cold, you should keep the concentration of propylene glycol high. The reason for this is due to the inefficiency of the compound in lowering the freezing point.This is because the compound is not efficient in lowering the freezing point. On the other hand, propylene glycol transfers heat faster when used in warm climate areas. This is why the compound is great if you will be hauling large loads on uneven terrains.
Engine Coolant Mixture
You should never dilute concentrated engine coolant with water from a faucet. Scaling of the engine usually results when you use tap water to dilute the coolant. The engine coolant should be diluted with distilled or de-ionized water. It is advisable to purchase pre-diluted coolant rather than a concentrated one.
To find the right coolant for your truck, it is important to research well. Following the above tips will ensure you end up with the right coolant. Please view this site http://www.ehow.com/how_7608441_refill-engine-coolant.html for further details.